| Customization: | Available |
|---|---|
| Type: | Basic Surgical Instruments Sets |
| Kind: | Plastic, Stainless Steel |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
Model
|
Anastomotic Nail(pcs)
|
Outer Diameter(mm)
|
Nail Width(mm)
|
Nail Height (mm)
|
|
TPYGZA-32
|
30
|
32
|
4
|
4.2
|
|
TPYGZA-34
|
32
|
34
|
4
|
4.2
|
|
TPYGZB-32
|
30
|
32
|
4
|
4.2
|
|
TPYGZB-34
|
32
|
34
|
4
|
4.2
|
|
Product Name
|
Disposable Anorectal Stapler (PPH)
|
|
Appearance
|
Smooth appearance, soft, clear outline, no burr, flying edge, scratches, shrinkage and other defects
|
|
Performance
|
·The anastomotic nail shall be stable in the assembly without bad deformation, and the nail shall not be exposed on the surface of the nail bin after swinging;
·The safety device of stapler should be flexible in opening and closing under firing condition;
·The reset spring should be elastic enough to reset quickly when the handle is released;
·Stapler should have good anastomosis and cutting performance. After anastomosis, the anastomosis nail should be b-shaped, the ring knife should not have a rolled edge or a broken edge;
·After the anastomosis, the anastomosis should be able to withstand a pressure of not less than 3.6kpa, and the water leakage should not exceed 10 drops within 15 seconds;
·The pressure resistance of expander should be ≥35N;
·The annular blade should be sharp and the cutting force should not be greater than 0.8N;
·The tensile strength of the material made of anastomotic nail should not be less than 240Mpa.
|
|
Package
|
The package shall be in good condition and there shall be no channels or holes in the bonded sealing area
|
|
Sterility
|
Sterilized with ethylene oxide
|
|
Residual EO
|
After sterilization with ethylene oxide, the residual ethylene oxide should not be more than 10μg/g
|
){kind=link}